Air conditioning units provide the much-needed respite from the sweltering summer heat. However, buying and maintaining these systems is often a costly affair. The operational cost, safety, and efficiency of these units are further influenced by the common mistakes that committed by the users when then decide the model and size of the unit. Discussed below are some common mistakes that you need to avoid making with your air conditioning unit.
Install An Inappropriately Sized AC Unit
Most people believe that while installing a smaller sized AC is wrong, installing a larger one does not create any problems. However, this is not true as an AC unit of larger size will cycle on and off more frequently and consume a greater amount of energy in the process. This can also result in wild and unwanted temperature changes, which can be extremely frustrating. At the same time installing a smaller unit, will not provide adequate cooling and this will cause the unit to wear out more rapidly.
Failure To Clean And Change The Filters
The filters of an air conditioning unit are designed to trap the dust and debris present in the outside air and keep them from entering your home. Thus they need to be cleaned regularly and even changed after a specific time period to ensure proper efficiency of the AC unit. Despite the task of cleaning and changing the filter is extremely simple and cheap, most homeowners tend to neglect it. The filters become clogged and there is a reduction in airflow or even freezing the evaporation coil of the AC unit.
Not Following The Recommended Service Schedule
Most homeowners tend to overlook the importance of getting their AC unit serviced on a regular basis, especially if they follow a regular cleaning routine. Regular service is essential for not only ensuring the thorough cleansing of the unit but also verifying the health and performance of its various parts and accessories. This makes you aware of the need repair or even replace any parts that are likely to cause problems, well in time.
Have Incorrect Thermostat Settings
Incorrect thermostat settings are one of the biggest reasons for reduced efficiency and performance of an air conditioning unit. Rather than turning the thermostat to the lowest temperature setting, it is advisable to set it at the highest temperature that you feel comfortable with. With lower temperature settings, the AC unit has to work extra hard to cover the huge change in temperature and this can damage the unit in the long run.
Required attention should be given towards the functioning of the AC to support it for serving you long. the temperature recommended is actually the highest temperature that one can be comfortable with. If you are setting the degree of your AC unit lower even a unit below than the normal will amount to 7% more power consumption. This, in turn, will make your utility bill go high which you may find sometimes hard to afford. Avoid doing the things advised and enjoy cool breeze at home.